Right Angle Drill
How do you disassemble a Vermont American Right-Angle adapter from a Black and Decker drill?
Open the drill chuck FULLY. Look inside the open chuck and you will see an allen screw. This screw holds the chuck in place on the spindle of the right angle attachment. With an allen wrench, remove the allen screw, being careful that the threads are left-handed (reverse threads) so it will seem as though you are tightening the screw when you are actually loosening it.
With the allen screw fully removed, take the allen wrench and close the chuch down on the short side, as you would chuck up a drill bit. This leaves the long side of the allen wrench protruding at a right angle to the closed chuck. It should look like a 90 degree bent drill bit closed in the chuck at this point.
Place the shaft of the right angle attachment (drill still attached at this point) in a vise, not too tight or you will damage the angle attachment, leaving the chuck free to move.
Lightly tap the long end of the allen wrench with a hammer at it's very end in a counter-clockwise direction (normal lefty-loosey direction) of the chuck rotation and the chuck will break free and spin off the right angle attachment.
Un-screw it off the spindle in other words, using the allen wrench as a chuck removal tool handle. the chuck will be quite tight fitting on the spindle, so you may need to get a little aggressive with the hammer to break it free.
At this point, with the chuck removed from the right angle attachment, it should be simply loosen the bolts on the angle attachment and it will slide off the drill spindle. install the chuck on the drill spindle, dont forget the reverse threads on the allen screw when reinstalling.
 |
 Milwaukee Heavy Duty Superhawg Right Angle Drill  US $240.00
|
 NEW IN BOX DEWALT DW960 CORDLESS RIGHT ANGLE DRILL18 VOLT TOOL ONLY US $70.00
|
 Milwaukee 1 2 Hole Hawg Right angle drill 2 speed US $137.50
|
 DeWalt DW124 1 2 Corded Right Angle Drill US $225.00
|
 Craftsman Nextec 120V Right Angle Impact Driver Drill Driver 2 pcs New US $109.99
|
 COMPACT 2 SPEED 1 2 RIGHT ANGLE DRILL US $.99
|
 DeWalt DW960B 18V Li Ion 3 8 Cordless Right Angle Drill US $41.00
|
 Milwaukee 1 2 Right Angle 2 speed Drill US $189.00
|
 Bosch 1132VSR 3 8 Corded Right Angle Drill US $94.99
|
 ALUMINIUM RIGHT ANGLE DRILL ATTACHMENT US $15.83
|
 Makita DA391D 96V DC NiCd 3 8 Cordless Right Angle Drill US $15.50
|
 New in Box Dewalt DW960 DW960B 18V 3 8 Cordless Right Angle Drill US $78.00
|
 Milwaukee 3107 6 Two Speed 1 2 Corded Right Angle Drill US $100.00
|
 Right Angle Drill Attachment US $25.00
|
 CRAFTSMAN 315101541 3 8IN 192V RIGHT ANGLE DRILL US $4.99
|
 DeWalt case DW960k 2 fits 18v Right angle drill US $4.99
|
 DeWalt DW160V 3 8 Corded Right Angle Drill US $75.00
|
 RIDGID RIGHT ANGLE DRILL DRIVER HEAD MINT US $.99
|
 3 8 ELECTRIC RIGHT ANGLE CLOSE QUARTER DRILL TOOL US $34.49
|
 Makita 3 8 Corded Right Angle Drill US $89.99
|
 New 3 8 Electric Close Quarter Right Angle Drill UL DIY Power Tools NR US $29.95
|
 Craftsman 3 8 Right Angle Drill Driver 144V 315101532 US $79.99
|
 Makita DA4000LR 1 2 Corded Right Angle Drill US $90.00
|
 Craftsman 11576 192V 3 8 Cordless Right Angle Drill US $35.95
|
 Porter Cable PCL120DD 12V Li Ion Cordless Right Angle Drill US $9.99
|
| Powered by phpBay Pro |
Dewalt Right Angle Drill Review
