Pcs Hole Saw
What CFM considered best for a 12VAC Fan used to vent a desk "storage" area used for a PC's CPU?
I am building a home office. Most L-shaped corner desks I've seen have drawers on one side and a storage compartment on the other. Though stores show storage area used for CPU, they are not vented/engineered for that. I can vent using a 2 inch hole saw and a 120 V AC 3 inch CPU/Hobby fan mounted onto back of desk - without destroying integrity of structural soundness according to the furniture Co's engineer.
Is 65 CFM too much? Or is 24 CFM too little?
it wont even be close to enough ... if u are enclosing the pc box i would say u would need (10) 2" fans at least .. i would open the back and leave the front open .. or plan some space on top to set the box would be even better ..
 |
 3mm Hole Saw Glasses Tile Core Cutter Diamond Bit 2 PCS  US $2.66
|
 3 pcs 10mm Diamond coated tipped drill bits hole saw US $3.50
|
 3mm Diamond coated drill bit hole saw 1 8 drills 10pcs US $5.98
|
 12mm Cutting Hole Saw for Tile Glass Ceramic 2 PCS US $4.93
|
 4 Pcs Silver Tone Diamond Tipped 10mm Marble Hole Saw US $6.07
|
 45mm Diamond coated drill bit hole saw 1pcs glass core US $5.26
|
 2 Pcs 20mm High Speed Steel Metal Hole Saw Drilling Bit US $6.91
|
 3pcs 7mm Diameter Diamond Coated Tipped Tile Glass Hole Saw US $8.79
|
 Straight Shank 16mm Cutting Marble Glass Hole Saw 3 Pcs US $6.07
|
 25mm Cutting Diameter Hinge Boring Bit Hole Saw 2 Pcs US $8.23
|
 5pcs 6mm Diamond coated drill bit hole saw glass marble US $3.50
|
 5 pcs 9mm Diamond coated drills bit bits hole saw core US $4.50
|
 Glass Ceramic Tile 2pcs 12mm Hole Saw Cutter Cutting US $4.04
|
| Powered by phpBay Pro |
3in Hole Saw Attempt
