Max Rotary
Setting my central heating?
My heating system has a room thermostat in the hall, thermostatic valves on all radiators and a min/max rotary control on the boiler. What is the best way to set all these controls to work with each other? HELP!
Sounds like you have had someone install on your system some good control additions which are more than most have and that is a good thing.
Not knowing all about your system I can give only good general info. but you do have lots to work with there.
First I think the main Thermostat on the wall should be set at the comfort level that you wish to maintain in the home. Exception... lower and use of sweaters for energy savings.
Then adjust each room radiator thermostatic valve down to the comfort level of that room itself unless it is unoccupied then, turn it to minimum or off.
Finally on your boiler your controller Trim it down towards min. to reduce the firing rate by operating it a while and see if you can get by with a lower firing rate and still maintain heat in the radiators at a lower setting there.
Good luck
Rangefinder
 |
 Hilti TE 55 SDS MAX Demolition Hammer Rotary Hammer Drill  US $54.03
|
 Hitachi® SDS Max HAMMER DRILL 724979 21 ROTARY BIT NEW US $23.00
|
 Hitachi® SDS Max HAMMER DRILL 724978 13 ROTARY BIT NEW US $20.00
|
 Hitachi® SDS Max HAMMER DRILL 724974 13 ROTARY BIT NEW US $18.00
|
 Hitachi® SDS Max HAMMER DRILL 724970 13 ROTARY BIT NEW US $16.00
|
 Bosch 11245Evs Max Combination Demo Rotary Hammer 2 US $992.02
|
 DREMEL MM300 ROTARY POWER TOOL MULTI MAX ACCESSORY ADAPTER ATTACHMENT NEW SALE US $4.49
|
| Powered by phpBay Pro |
Metabo KHE56 1-3 4-Inch SDS-Max Rotary Hammer.
