Drill Core Bit
Soil Stack and new Soil pipe, help please!!?
I am in the process of having a go at fitting my own bathroom, I am moving the toilet from one side of the room to the other so instead of boxing up the soil pipe around the room, I have core drilled a hole straight out of the house with the hope of extending my existing soil pipe on a little (approx 1 metre). However when I have gone outside and looked at my soil stack and existing pipe I think I may have drilled my new hole a little low so when the new extended soil pipe is fitted it will more or less be straight rather than a slight slope down to soil stack. How do I get around this problem? Can I move the joint in the soil stack to the soil pipe a bit further down and if so how do I do this? What is the process of attaching the new soil pipe to the stack? Thanks very much!! Please give me as much info as possible cos I have never done this before!
I need full answers please, whether the fixings are push fit or glue and how to sort out my straight rather than sloping soil pipe!!!!
Hi,
First confirm that you have drilled the hole to low, over that distance a fall of an inch will be plenty. I am assuming that you have PVC pipe with this answer. If the existing stack is solvent welded replace with the same as follows; get the same branch that you have now and any bends that you need as well as an additional collar. Cut the stack below the existing branch allowing for the new additional collar and not forgetting to lose the inch or so that you have lost from the new hole, make it less if you have any doubts as more fall won't hurt. rebuild the stack using the new components as required. Solvent weld pipes have smaller looking fittings where as push fit as a bit bulkier. If it is push fit you will need a rasp to sham-fer any new edges before you put them together and some silicon lubricant to help push them together.
 |
 Diamond core bore 5 core drill bit  US $39.09
|
 Antique Vintage Irwin Bit Drill Solid Core Auger Bit Set 13 Org Wood Case Mint US $63.00
|
 2 pc DIAMOND TILE GLASS MARBLE HOLE SAW CORE DRILL BIT US $19.99
|
 Stone Marble Diamond 32mm Dia Hole Saw Drill Core Bit US $13.83
|
 New 4 Laser Welded Wet Diamond Core Drill Bit Concrete Bore Rig US $78.99
|
 1 3 8 Diamond Core Drill Bit For Granite US $29.99
|
 2 Pcs 10mm Dia Marble Sintering Diamond Core Drill Bit US $9.06
|
 10mm Dia Diamond Tipped Straight Shank Drill Core Bit US $6.34
|
 3 pc DIAMOND TILE GLASS MARBLE HOLE SAW CORE DRILL BIT US $17.99
|
 5 pc DIAMOND TILE GLASS MARBLE HOLE SAW CORE DRILL BIT US $24.29
|
 10 DIAMOND TILE GLASS MARBLE HOLE Saw CORE Drill Bits US $71.99
|
 Hilti Core Drill Bit Free Shipping with Buy It Now US $140.00
|
 4 concrete core drill bit bits 6 lomg body US $83.00
|
 Diamond Drills Core Bit 1 4 Tile Stone Porcelain US $36.30
|
 SET 10 DIAMOND TILE GLASS MARBLE HOLE Saw CORE Drill Bits SIZES 1 8 2 3 8 in US $79.99
|
 DIAMOND PRODUCTS CORE BORE 1 SUPREME CORE DRILL BIT NEW US $25.00
|
 2 CONCRETE CORE HAMMER DRILL BITS DRILLS SDS max plus US $61.00
|
 10 1 2 CORE DRILL BITSUNUSED US $50.00
|
 Diamond Husqvarna core drill bit US $200.00
|
 Vintage IRWIN Twist Drill Solid Core Auger Bits 6 pc Set in Wooden Box US $49.95
|
 CORE BORE 7 8 CARBIDE CORE DRILL BIT NEW US $25.00
|
 HD 1 1 2 Rotary Hammer Core Drill Bits Power Tool Metal Case Deep Gauge New US $110.99
|
| Powered by phpBay Pro |
Diamondhead USA DRY Core Bit drills hole in granite.mov
