Drill Bit Sds

How to drill through a wall without the proper length of the drill bit?
Here is my dilemma. I need to drill thorugh a 2 feet thick concrete wall(with pebbles in it) but I only have a 1,2 feet sds drill bit(my hammer is a makita hr2450). The nearest tool rental is pretty far. I thought of drilling first from the inside then from the outside but theres only one reference point which is the natural gas pipe. So is there any way for the two holes(inside and outside) to meet? How do I find the height reference point?
A carpenters level is all you need. Draw a level line on the wall inside and outside, just make sure you use the same , either the top or the bottom of the pipe for your reference point. Then measure over to a point that is in line vertically with where you want the hole and draw a plumb line up and down and measure to where you want the hole, do the same thing both inside and outside. Then just make sure you hold the drill at right angles to the wall both up and down and sideways and the holes should come very close to lining up.
![]() |
![]() Dewalt Carbide Hammer Drill Bit SDS Max DW5810 13 1 2 overall New US $24.95
|
![]() 12 SDS Plus Drill Bits Rotary Hammer Tools US $19.99
|
![]() 14mm Tip Width Gray Metal SDS Shank Masonry Drill Bit US $6.89
|
![]() 11PC 18 LONG SDS CONCRETE MASONRY DRILL BIT SET BITS US $28.99
|
![]() 16mm Width Tip SDS Plus Shank Concrete Hammer Drill Bit US $7.43
|
![]() 6mm Cutting Dia SDS Plus Shank Rotary Hammer Drill Bit US $5.02
|
![]() SDS Plus Shank 12mm Tip Masonry Stone Hammer Drill Bit US $8.80
|
![]() SDS Plus Shank Drill Arbor w Single Flute Twist Bit US $29.70
|
![]() Hawera SDS Plus Masonry Drill Bit 214x14 1 4 x 5mm 1 4 US $11.36
|
![]() 17 PC DRILL BITS CHISEL SDS PLUS CONCRETE MASONRY SDS US $24.99
|
| Powered by phpBay Pro |
Top 5 Drill Bits


US $7.16







































