Blade Angle Grinder
angle grinder blade stuck?
4 1/2 inch angle grinder
blade stuck in grinder cant loosen [turn] the tightening nut
what is the best way to get it lose?
[ps already tried wd40 oil etc.]
These can be tough. The best way to get them off is if there are no holes in the nut, then be very careful and drill a few holes about 5/32" in the nut. Try not to go too far past the nut itself, then with a small drift pin, place it at an ange to the surface and a few sharp blows with a small hammer on the end of the pin will usually do the job.
Or if you have one with a nut, then just hit the wrench a few good blows, and it should come off
 |
 45 DIAMOND BLADE GRANITE STONE ANGLE GRINDER 2PK  US $20.00
|
 115mm angle grinder saw blade for wood 24 TCT teeth Must have disc US $26.87
|
 45 CONTINUOUS RIM DIAMOND BLADE FOR ANGLE GRINDER US $10.99
|
 Marcrist CK850 115mm 45 Angle Grinder Blade Diamond US $75.84
|
 Makita 9557PBX1 Angle Grinder Diamond Blade Combo Tool Kit US $94.99
|
 Makita 4 1 2 Angle Grinder W Diamond Blade 9557NBX US $54.99
|
 Ten 5 New Diamond Blade Segmented Saw Angle Grinder US $49.99
|
 Makita 9557PBX1 4 1 2 Angle Grinder w Diamond Blade US $115.95
|
 Curve Cutting Tile Disc Blade 180mm For Angle Grinders US $62.58
|
 Brand New STAR Gas Angle Grinder 180mm 7 Diameter Blade US $299.00
|
| Powered by phpBay Pro |
Sharpening Mower Blade, Angle Grinder
